Drains We Clear

Water backing up, draining slow or gurgling? If a plunger hasn’t fixed it, we can. These are the clogs we clear most often.

How it works

Clear Drains, No Surprises on the Bill

Every drain call follows the same four steps, so you know what’s happening and what it costs before any work begins.

  • 1
    Tell us what’s going on

    Call or send a request. We’ll ask which drains are slow and how long it’s been happening.

  • 2
    Get the price first

    We look at the problem and give you a firm price. You decide whether to go ahead.

  • 3
    We clear the line

    We run a drain cable (snake) through the line to break up the clog and pull it out, and we protect your floors while we work.

  • 4
    We test and explain

    We run water to make sure it drains freely, then tell you what caused the clog and how to keep it from coming back.

Clog keeps coming back? Snaking opens a path through a clog. If grease, scale or tree roots keep closing the line, whole-house hydro jetting scours the pipe walls clean. See hydro jetting.

Drain Cleaning Questions

How do you price drain cleaning?

We look at the problem first and give you a firm price before we start. The price depends on which drain is clogged, how far down the line the clog is and how easy the line is to reach. The price you agree to is the price you pay, and you decide whether to go ahead.

How long does it take to clear a drain?

Most sink, tub and shower clogs are cleared in [about an hour]. A main sewer line can take [1 to 2 hours], depending on how easy the cleanout is to reach.

What’s the difference between drain cleaning and hydro jetting?

Drain cleaning uses a cable (a snake) to break through a clog and get water flowing again. Hydro jetting sends high-pressure water through the pipe to scour off the grease, scale and roots that cause repeat clogs. For a one-time clog, a snake is usually all you need. If the same drain keeps clogging, ask us about hydro jetting.

Should I try a store-bought drain cleaner first?

We’d skip it. Chemical drain cleaners rarely clear a full clog, repeated use can damage older pipes and fixtures, and they leave caustic water sitting in the line. If a plunger doesn’t work, give us a call.

Why are several drains backing up at once?

When more than one fixture backs up, or the tub gurgles when you flush, the clog is usually in the main sewer line rather than a single drain. Keep water use to a minimum and call us. We’ll clear the main line from the cleanout.

Do you clear drains for businesses?

Yes. We clear drains and grease lines for restaurants, churches, halls, small shops and farms around Hendricks County. See commercial plumbing.

How can I keep my drains from clogging?

Put cooking grease in the trash, not the sink. Use a strainer in the kitchen sink and a hair catcher in tubs and showers. Don’t flush wipes, even ones labeled flushable. If a drain starts to slow down, call before it stops completely.

What areas do you serve?

We’re based in Clayton and clear drains in Plainfield, Danville, Avon, Brownsburg, Mooresville, Monrovia and West Indianapolis.

Slow Drain? Let’s Get It Moving.

Slow Drain? Let’s Get It Moving.

Call us Monday to Friday, 8 am to 5 pm, or send a request and we’ll call you back to set a time. Tell us which drain and what it’s doing.

  • Firm price before we start
  • Homes and small businesses
  • We clean up when we’re done